You know the situation: your system is perfectly set up and carefully equalized. You've done everything possible to avoid problems. Then it happens: a mic too close to a speaker... ear-splitting feedback. Switch on a DSP1124P and you'll hear the difference immediately. Within fractions of a second, the Feedback Destroyer Pro's ingenious search algorithm locates feedback frequencies and sets extremely narrow, 1/60-octave filters, leaving the desired signal virtually untouched. The result: a rich, full sound without feedback. And without headaches.
Features
Digital 2-channel feedback suppressor/parametric EQ based on a high-power 24-bit DSP
20-bit A/D and D/A converters with 64/128 times oversampling
Automatically searches and suppresses feedback frequencies
24 programmable, fully parametric filters, adjustable manually or via MIDI
Single-Shot, Auto and Manual mode selectable for each filter
24-bit internal processing, professional 46-kHz sampling rate
Servo-balanced inputs and outputs with XLR and 1/4 in. TRS connectors
Internal power supply for professional use
Extensive MIDI implementation
Super-precise 8-segment LED level meters
"Future-proof" updatable software architecture
Technical Info
Analog Inputs Connectors: XLR and 1/4 in. jack
Analog Outputs Connectors: XLR and 1/4 in. jack
Bandwidth: 20 Hz to 20 kHz, -3 dB
Noise: > 94 dB, unweighted, 20 Hz to 20 kHz
THD: 0.0075 % typ. @ +4 dBu, 1 kHz, Gain 1
Crosstalk: < -76 dB
MIDI Interface: Type 5-Pin-DIN-Socket IN/OUT/THRU
Digital Processing: Converters 20-bit Sigma-Delta, 64/128x oversampling
Display: Type 2 1/2-digit numeric LED-Display
Power Consumption max. 15 Watts
Dimensions (H x W x D): 1-3/4 x 19 x 7-1/2 in. (44.5 x 482.6 x 190.5 mm)
Net Weight: 2 kg, approximately
Shipping Weight: 3 kg, approximately
No comments:
Post a Comment